CAS NO. : 98-00-0Molecular Formula : C5H6O2 Properties：Furfuryl alcohol is a furan derivative, also named furan methanol. It is clean to light yellow transparent liquid. It turns to brownish-red color

one Characteristics 1. According to room temperature and sand temperature, choose different types of curing agent, can get a satisfactory curing speed. 2. Adjust the amount of curing agent (30-60% of the amount of resin added), can get different usable time and demoulding time. 3. Appearance of light brown transparent liquid, crystallization temperature ≤-15℃. two Refer to the relevant introduction of the hard furan resin. Packing and storage 1. Please store in ventilated, cool and dry room, no open flame. 2. When loading and unloading, transportation and storage of curing agent, do not impact, pay attention to good packaging and sealing, it is strictly prohibited to mix curing agent and resin directly, so as to avoid occurrence

Yj-2 furan resin has: 1. Excellent corrosion resistance, strong acid, strong alkali, electrolyte solution and organic solvent, but not strong oxidation medium. 2. Can withstand high temperature of 180-200 degrees. Yj-2 furan resin is the second generation of new technology products developed on the basis of the original YJ furan resin. Its physical and mechanical properties, especially bond strength and tensile strength, have been significantly improved. Yj-2 furan resin series products are two-component corrosion-resistant materials composed of modified furfuryl alcohol resin and various powdery fillers mixed with curing agent. Including: furan cement, furan FRP, furan mortar and furan

1, MAO brand casting V method coating has good adhesion, spraying in EVA film does not flow, drying speed is fast. 2, the V method coating can maintain stability under high temperature impact, high strength after drying, no cracking. 3, coating hanging, strong adhesion, good suspension performance. The coating layer has good automatic peeling ability after casting. 4, low gas emission, shot blasting after the casting surface smooth, no pores and other characteristics. 1. V-method coating for casting has good adhesion, good stability under high temperature impact, high strength after drying or self-drying, no stratification, no cracking and so on. 2, this series of coating has high fire resistance, good peeling,

one Thermoplastic self-hardening furan resin has excellent thermoplastic and secondary hardening process at high temperature. High temperature performance, concession is up to or better than alkaline phenolic resin, can effectively absorb the thermal expansion of sand mold, prevent cracks, veins, sand and other casting defects, especially suitable for the stable production of carbon steel, alloy steel, ductile iron parts. 2. The original sand has a wide application range, silicon sand, chromite sand, magnesium olivine sand have good applicability; The sand mold has good collapsibility at high temperature, and the casting is easy to drop sand and easy to clean. two The application method is the same as that of ordinary self-hardening furan resin. 3. Packaging and storage packaging with ordinary self-hardening furan resins

1. Good fluidity of sand mixing, easy manual or mechanical sand filling, high surface finish of casting, high dimensional accuracy. Good environmental performance, small smell and less smoke during operation. 2. It can be used for the production of cast steel, cast iron and non-ferrous metal castings; Excellent curing performance, easy to demoulding, good hard permeability, sand core (type) at room temperature and high temperature strength. 3. The sand core (type) is easy to break and regenerate, which can reduce the consumption of raw sand. two Usage method 1. Ratio of raw sand (reclaimed sand) : curing agent: resin ==100:0.3-0.6:0.7-1.5 by weight of resin. 2. Mixing method

one Features 1. The binder system does not contain harmful elements of casting: nitrogen, sulfur, phosphorus, especially suitable for carbon steel, alloy steel, ductile iron casting production. 2. The adhesive system can be secondary cured at high temperature, has good thermoplastic, can reduce the casting thermal cracks, veins, porosity defects. 3. The adhesive system produces almost no harmful and irritating smell in the process of operation, and the operating environment is greatly improved. two 1. Choose different types of curing agent according to room temperature and sand temperature, adjust the amount of different curing agent (20-30% of the amount of resin) between the adjustment. 2. Use in the original sand first

1. Performance characteristics: this product has excellent plasticity, it will not break after closing the box up and down, it can effectively prevent the defects of casting flapping and running fire, easy to use, save time, suitable for all kinds of sand mold. Specifications: Diameter: 4.5, 6, 8, 10, 12 (mm) 3. Instructions: Use the product, just along the cavity around 30-50mm evenly spread can be; Users can choose appropriate mud bar diameter according to sand mold size and pouring weight. 4. Packaging and storage: wound on the plastic shaft, 1Kg or 1.5kg each, sealed in plastic bags, 16Kg each; In a room